Our Products

Above Ground Fuel Tanks

MINPROVISE’s primary focus throughout our fuel tank design process is on achieving a premium fuel tank design at a competitive price point. This focus, in conjunction with Proleum’s end-to-end business model (providing the design, manufacture, transportation and install of tanks) allows for crucial savings to our clients and partners. The tanks come in a full range of sizes, starting from 15 Kiloliters up to 200 Kiloliters. Each fuel tank in our range comes with a multitude of additional features to ensure your site-based requirements are met. Such features include; Short or long walking platforms for larger tanks, safety cages, tailored ladder/stair systems and a range of base support options. It is widely accepted that the cost and operational convenience of storing gasoline, diesel fuel and oil on-site is important to the efficient running of any oil, gas or mining facility. The savings on effective refueling processes and convenience of location are just a few reasons to consider this alternative, removing the unpredictability of public fueling locations and the appropriateness of fuel provided by external parties. Contact Us at MINPROVISE to discuss your specific tank requirements and we can tailor our design and manufacture to your needs.

EziTite Headnut

Technofast Industries have successfully developed the EziTite®  Hydraulic Head Nut System to replace standard mantle Head Nuts.

Since the development of the Gyratory Crusher, mineral processing industries have sought better means to effectively and safely tighten mantle head nuts. Technofast Industries have successfully developed the EziTite®  Hydraulic Head Nut System to replace the outdated, standard mantle Head Nuts. In addition to technical and performance criteria, the major benefits of the design are focused on the protection of operators from strike or shrapnel injuries that commonly occur when hammering the standard mantle head nut tight. The EziTite® features a hydraulic clamping nut and reinforced protective cover which can be constructed according to the abrasive nature of the material being crushed.

Tool Features:

  • Precise clamping forces are generated by hydraulic pressure activation in the optimised containment area of the EziTite® nut.  The Head Nuts are fitted with mechanical locking rings that retain these tensile loads. In the unlikely situation that there is a hydraulic malfunction, a simple, patented breaker-ring (that is positioned between the lock ring and the nut body) can be used to release the load on the shaft.

Benefits of the EziTite®  Hydraulic Head Nut

  • Vastly reduces downtime and maintenance problems
  • Improves productivity
  • Greatly enhances tool life
  • Repeatable accuracy of the tensioning operation reduces product variation
  • Achieves faster throughput without compromising product quality
  • Minimises risk of personal injury and collateral damage to capital equipment during blade and tool changes
  • Threaded locking collar counteracts loosening forces of impact on rotating shafts
  • Requires low level of skill for operation

EziTite Hydraulic Nut

The EziTite® Hydraulic Nut is a precision engineered, high pressure/high performance, hydraulically operated bolt tensioning device that can be quickly and easily fitted and used with Technofast pumping equipment.

The EziTite hydraulic nut is ideal for tensioning all of the studs on a flange, joint or cover – simultaneously loading 100% of the fasteners at once. This ensures an extremely accurate and balanced load onto the flange/joint.

EziTite Features:

  • Reduces maintenance down time
  • Improves safety on the job
  • Gives reliable and precise tensioning
  • Is user-friendly
  • Fast to fit and remove
  • Requires little physical effort
  • Is ideal for difficult or confined spaces

The EziTite® Hydraulic Nut is Ideal where:

  • Accurate and reliable loading is required on bolting
  • Vibrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustment or removal of nuts
  • There are confined or difficult nut locations

EziTite TR Hydraulic Nut

Tool Features:

  • The patented metal-to-metal seal design allows for applications in temperature conditions upwards of 550˚C
  • Compact Design for tight, confined applications
  • Smart design to eliminate load losses
  • Secondary backup release mechanism (Sacrificial ring)
  • Multiple tensioning provides even bolt loads and short assembly/disassembly down time

Benefits of the EziTite® TR Hydraulic Nut:

  • Reduces maintenance down time
  • Improves safety on the job
  • Gives reliable and precise tensioning
  • Is user-friendly
  • Fast to fit and remove
  • Requires little physical effort
  • Is ideal for difficult or confined spaces

The EziTite® Hydraulic Nut is Ideal for:

  • Pressure Vessel Closure(i.e.: Autoclaves, Boilers, etc)
  • Flange Makeup
  • Gas Turbine Joints
  • Steam Turbine Joints
  • High Temperature applications

Clamp Nut

EziTite® Hydraulic Clamp Nuts are the modern, safe and efficient way to ensure precise tool clamping.

EziTite® Hydraulic Clamp Nuts replace conventional, torque-loaded threaded nuts to make shaft tensioning a simple, safe and efficient hydraulically assisted operation. They are also widely used to set large shaft bearings. Our Clamp Nuts are manufactured in a wide range of sizes to suit applications throughout many industries. EziTite® Hydraulic Clamp Nuts are made in a standard range to suit thread sizes from 50mm to 300mm – additional sizes can be tailored by request.

 Tool Features:

  • Vastly reduces downtime and maintenance problems
  • Improves productivity
  • Is user friendly, fast and easy to fit
  • Greatly enhances tool life
  • Repeatable accuracy of the tensioning operation reduces product variation
  • Achieves faster throughput without compromising product quality
  • Minimises risk of personal injury and collateral damage to capital equipment during blade and tool changes
  • Threaded locking collar counteracts loosening forces of impact on rotating shafts

Benefits of EziTite® Hydraulic Clamp Nuts:

  • Accurate hydraulic loading
  • Positive locking with mechanical ring
  • Replaces lug wrench and hammer method
  • Increases worker safety – decreases injury potential

EziTite® Hydraulic Clamp Nuts are Ideal where:

  • Accurate and reliable loading is required on bolting
  • Vibrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustment or removal of nuts
  • There are confined or difficult nut locations

Cam Nut

Technofast’s revolutionary Cam Nut EziJac system creates an affordable and efficient solution, in a compact system that is simple, safe and easy to use.

Normally, Bolt Tensioning tools pull on the bolt threads protruding above the regular hex nut, which are then screwed down to retain the loads induced by hydraulic operation of the tool.  With no available thread, the Cam Nut performs as the connection to the bolt for the operation. Its integral collar expands to take up  the bolt’s elongation under force and retains the load when the hydraulic charging pressure is released.

 Tool Features:

User friendly, fast to fit & remove.

    • Requires little physical effort
    • Quick connection from nut to Tensioner
    • Ideal for situations with short bolt grip length
    • Modular construction reduces overall tool weight
    • Operating temperatures from –40 deg to +650 deg C

Benefits of using a Cam Nut:

    • No longer need to replace expensive studs to provide sufficient grip length
    • Modular construction reduces overall tool weight
    • Designed for extreme situations/adverse conditions
    • Minimises cost
    • Reduces downtime
    • Achievable reliable and precise tensioning the first time
    • User friendly to improve safety
    • Requires little physical effort
    • Fast to fit and remove
    • Reduce breakdowns and damage
    • Removes risk of strike and pinch point injuries caused by other tightening methods

A Cam Nut is Ideal where:

    • Regular maintenance requires repeated adjustment or removal of nuts
    • Speed of operation is essential
    • Bolts are of large diameter
    • Accurate and reliable loading is required on bolting
    • Space for tooling is restricted
    • Simultaneous tightening of bolts is required
    • Even joint/gasket compression is required

EziTite Hydraulic Bolts

EziTite® Hydraulic Bolts are precision engineered, high performance, hydraulically operated fasteners which incorporate mechanisms for tensioning. They can be quickly and easily fitted using standard pumping equipment such as Technofast’s hand operated, Electric or Air Hydraulic Pumps.

EziTite® Hydraulic Bolts minimise the time required to carry out critical bolting procedures and are extremely resistant to vibration and shock loads. They are specified and manufactured using alloy or stainless steels to suit application requirements. Protective covers or optional surface treatments are available.

EziTite® Hydraulic Bolt Features:

  • Standard Range—20mm (7/8”) to 100mm (4”) bolt diameter
  • Unique Lock-ring thread technology ensures maximum retained load
  • Spherical seat gives alignment to joint face
  • Variety of seal designs for temperature/pressure requirements
  • Quick connect fittings

Benefits of the EziTite® Hydraulic Bolt

  • Stroke Indicator
  • All standard Hydraulic Bolts fitted with CEJN type male snap fittings, 1/8″ BSPP porting and bleed plugs
  • Hydraulic Bolts supplied with spherical washers as standard
  • Hydraulic Bolts may be supplied with Nut and flat washer
  • Maximum pressure of standard Hydraulic Bolts is 100 MPA (Custom designs may be higher)

The EziTite® Hydraulic Bolt is Ideal where:

  • Accurate and reliable loading is required on bolting
  • Vibrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustment or removal of fasteners
  • Fasteners may be in confined or in difficult locations
  • Applications may include: Vibrating Screens and Sieves, Piping Flanges, Reactor Joints and Covers, Autoclaves and or Foundation Bolts.

Hercules 210.10

The Big Boss of our fleet – with a ridiculous 21 tonne lifting capacity!

Max Capacity: 21,000kg

Max Lift Height: 9.9m

Weight: 27,000kg

Samson 70.10

The tough guy, with the highest weight to height ratio.

Max Capacity: 7,000kg

Max Lift Height: 9.65m

Weight: 11,300kg

Icarus 40.17

Need to take that 4,000kg lift higher? Then Icarus is for you – with the highest reach of our entire fleet this telehandler will get your load to the highest of heights. Ideal for building sites.

Max Capacity: 4,000kg

Max Lift Height: 16.9m

Weight: 12,000kg

Runner 40.13

The strength to lift to the height you need – this machine is most popular for its versatility.

Max Capacity: 4,000kg @ 600mm

Max Lift Height: 12.4m

Weight: 10,100kg

Zeus 40.7

Unlike the 35.10, this telehandler lifts 500kg more, but at the expense of a little height sacrifice. The Zeus 40.7 is known through the industry as one of the most ergonomic haulers.

Max Capacity: 4,000kg

Max Lift Height: 7.1m

Weight: 7,600kg

Zeus 35.10

Like the god himself, this telehandler has the strength and height to reach the heavens. This machine has exceptional height reach for its size and max weight capacity.

Max: 3,500kg

Max Lift Height: 9.75m

Weight: 7,600kg

Dedalus 30.7

Apollo’s big brother with a bit more grunt and height. Still very ideal for tight applications with a higher or heavier lift required.

Max Weight: 3,000kg

Max Lift Height: 6.35m

Weight: 6,000kg

Apollo 25.6

The baby of our fleet, but in no way lacking in experience or ability! Perfect for smaller lifts in tighter spaces, with a lightweight and smaller frame for those tight squeezes.

Max Capacity: 2,500kg

Max Lift Height: 5.78m

Weight: 4,800kg

 

Paragon Crusher Backing

The Paragon Diamond Standard has been applied to these epoxy grout solutions.

Construction Grouts

Paragon General Purpose epoxy is designed as a perfect solution for crusher backing, vertical grouting of starter bars, and many other general-purpose uses. This grout is a pourable epoxy resin-based grout, suitable for open cavities up to 50mm.

Here at Minprovise, we can also supply Paragon Deep Pour, which contains deep pour epoxy resin-based grout. Just like our general-purpose product, it’s suitable for open cavities up to 50mm.

Uses

The construction grouts we supply can be used for the following applications:

  • Crusher Backing
  • Vertical grouting of starter bars
  • Machine or column bed grouts
  • General purpose pourable grout

All of our products can be purchased in 1, 5 and 10 kg kits. If you’re unsure of what size kit you need for your crusher backing, vertical grouting, machine grout, column grout, or just general-purpose grout, contact our team who can provide you with expert advice and more.

Huntsman Araldite, Crusher Backing Products

PROVEN IMPACT-RESISTANT CRUSHER BACKING EPOXY SYSTEMS

Huntsman have a full range of impact-resistant crusher backing epoxies to suit all crusher reinforcing situations, from easy, on-site preparation and application, through to specific temperature and location conditions. Contact us for the best kit to match your site requirements and prolong your crusher life by strengthening it against everyday wear and tear.

FastJac

Technofast’s FastaJac saves on Production, Labor and Maintenance Costs for Manufacturers and End Users of Plate Heat Exchangers.

The use of a lightweight hollow cylinder jack, in conjunction with the patented ‘Tri Nut’, allows the compression of plates to be  carried out evenly, squarely and efficiently. The hydraulic cylinders simultaneously compress the plates. The Tri-Nut is designed to fit over the major diameter of the thread until it engages into it’s spherical seat. Then the nut closes onto the thread and the nut is screwed home as normal. This facilitates speedy fitting and removal of the tools  removing the need for ‘running down’ the Tensioner retaining nut over the full length of the thread.

Tool Features:

  • The Patented ‘Tri Nut’ allows the Tensioner to be removed and installed on the exchanger quickly
  • The hydraulic cylinders simultaneously compress the plates so the compression of plates are carried out evenly, squarely and efficiently
  •  Unique cam lock design
  • Tri Nut locks into tool, even in upside down position
  • Quick connect fittings
  • No Pinch Points

Y2 & X2 – 2 Stage Tensioning

Technofast’s X2 & Y2 2-Stage EziJacs encompass a large range of slim bodied tensioners to complete maintenance on any application with restricted space.

The 2-Stage series of hydraulic Tensioners are a lightweight, user friendly range of Tensioners, which are quickly and easily fitted in restricted spaces. These Tensioners are powerful & provide accurate and versatile tensioning of bolts and studs, whilst being fast, simple and safe to use.

Tool Features:

  • Stroke Indicator
  • Long Stroke
  • Spring return piston
  • Over stroke prevention
  • Slim fit design
  • Leak-free, low-friction seals
  • Nitrated components
  • Optional side gear box
  • Quality assured

Technofast’s X2 and Y2 Multistage Bolt Tensioners may be fitted with an optional Gear Drive to rotate the retaining nut without the use of a Pin Spanner. The drive is operated using a standard 1/2″ socket wrench. The feature optimises the speed of operation and allows the tools to be used in restricted spaces where a Pin Spanner drive could not be employed. An Integral idler gear is used to ensure that the drive tool and nut rotations are in the same direction.

B3M EziJac Bolt Tensioner

The EziJac uses hydraulic pressure to tension the bolt to the exact load required. Once the bolt has been tensioned, the nut is wound down the thread to retain the load. The EziJac is then de-pressurised, released and ready to use again.

Tool Features:

  • Stroke indicator
  • Long Stroke
  • Interchangeable Adaptor Kits
  • Leak-free, low-friction seals
  • Nitrated components to increase the tool life
  • Optional second port
  • Quality assured

Benefits of a B3 Series EziJac:

  • Reduce assembly time for critical jointing applications
  • Multi-point tensioning for even gasket compression
  • Reduced labour input
  • Requires little physical effort
  • Improves safety on the job by eliminating hammer tightening
  • No pinch points – Unlike power wrenches
  • Remote pumping – No operators in close work area
  • User friendly; fast to fit and remove

 The B3M EziJac is Ideal where:

  • Accurate and repeatable loading is required
  • Irrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustments or removal of nuts
  • Confined and difficult nut locations
  • Simultaneous tensioning of bolts is required (eg: Flanges)

B3S EziJac Bolt Tensioner

Safe, Easy-to-operate and built with Spring Return – This Product ensures only the most accurate of Bolt Tensioning.

The B3S EziJac uses hydraulic pressure to tension the bolt to the exact load required. Once the bolt has been tensioned, the nut is wound down the thread to retain the load. The EziJac is then depressurised, released and ready to use again.

Tool Features:

  • Stroke indicator
  • Long Stroke
  • Spring return piston
  • Interchangeable Adaptor Kits
  • Leak-free, low-friction seals
  • Nitrated components to increase the tool life
  • Optional second port
  • Quality assured

Benefits of a B3 Series EziJac:

  • Reduce assembly time for critical jointing applications
  • Multi-point tensioning for even gasket compression
  • Reduced labour input
  • Requires little physical effort
  • Improves safety on the job by eliminating hammer tightening
  • No pinch points – Unlike power wrenches
  • Remote pumping – No operators in close work area
  • User friendly; fast to fit and remove.
  • Spring Return models for automatic retraction

 The B3S EziJac is Ideal where:

  • Accurate and repeatable loading is required
  • Irrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustments or removal of nuts
  • Confined and difficult nut locations
  • Simultaneous tensioning of bolts is required (eg: Flanges)

B2 EziJac Bolt Tensioner

The B2 EziJac Stud Tensioner utilizes the power of hydraulic pressure to produce the force necessary to tension bolts and studs accurately & safely.  The B2 EziJac Dedicated Stud Tensioners provide the answer to many of the fitting problems associated with using larger tensioning equipment. They are also ideal for single task applications which do not require interchangeability of thread sizes. Any number of B2 EziJacs can be interlinked to provide simultaneous tension over multiple studs or bolts as required

Tool Features:

  • Stroke Indicator
  • Long Stroke
  • Leak-free, Low-friction seals
  • Nitrated components to increase the tool life
  • Manual return
  • Optional second port
  • Quality assured

Benefits of B2 EziJac

  • Reduces maintenance down time
  • Improves safety on the job by eliminating hammer tightening
  • Reliable and precise tensioning
  • Is user friendly – fast to fit and remove
  • Requires little physical effort
  • Ideal for confined spaces or difficult locations

The B2 EziJac is Ideal where:

  • Accurate and repeatable loading is required
  • Irrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustments or removal of nuts
  • Confined and difficult nut locations
  • Simultaneous tensioning of bolts is required (eg: Flanges)

Dugless 900

Designed and built by Minprovise, the Dugless 900 is an automated digging and cleaning unit capable of safely manoeuvring under low conveyor sections and other inaccessible places. Created specifically as a safe, cost effective solution for the mining industry, its low-profile design enables it to access spaces under conveyor systems and remove spillages and blockages without any risk to workers or equipment.

For more information or to request a price for the Dugless 900, contact our expert team today.

BENEFITS OF THE DUGLESS 900

The benefits of the Dugless 900 include, but are not limited to:

    • No conveyor shutdown required during maintenance
    • Easily accesses low ground clearance conveyor frames
    • No manual labour needed
    • Improved safety, lower accident risk
    • Improved productivity
    • Greater cost-efficiency
    • Designed to prevent drive machinery breakdowns

FEATURES

The Dugless 900 features:

  • The capability to be remotely controlled
  • Simple 2 joystick hand remote harness
  • Only 560mm tall
  • Self-levelling 4 in 1 bucket heaped capacity of 0.13m3

ACHIEVEMENTS OF THE DUGLESS 900

Since its launch, the Dugless 900 has proven its success globally to the mining and bulk material handling industries. In 2009, the year the Dugless launched, the unit won:

  • Winner of Bulk Materials Handling Award – London’s Mining Magazine
  • Winner of Best Practice in OH&S Category – 4th Australian Bulk Handling Awards
  • Finalist in the Innovative Mining Solutions Category – 6th Annual Mining Prospect Awards

Since its launch, the DUGLESS 900 has proven its success globally to the mining & bulk material handling industries.

 

CONTACT US

To learn more about the Dugless 900, or to chat with our team about pricing and availability, fill out the contact form below and someone will be in touch shortly. Alternatively, call us on (08) 9359 6800 today.

Thermo Scientific Ramsey Oretronic III

This tramp metal detector minimizes lost production by providing an economical and reliable means to protect expensive crushers, conveyors and other process equipment from damage by tramp metal. It can detect all types of metallic scrap, including bucket teeth, manganese steel mantles, bore crowns, bar scrap chains, tools and more. Because the Thermo Scientific Ramsey Oretronic III is insensitive to materials with high magnetic permeability and electrical conductivity, it can be used in applications where conventional metal detectors produce an unacceptable false alarm rate. It is designed especially for belt conveyors moving coal, iron pellets, minerals, aggregates and other bulk materials.

LFM3 Moisture Analyser

The Thermo Scientific Low Frequency Microwave (LFM3) moisture analyzer provides accurate, real time, cost effective measurements and can be easily integrated and installed in a variety of applications.

CB Omni Elemental Cross-belt Analyser

The Thermo Scientific CB Omni cross-belt elemental analyser provides reliable and accurate analysis of bulk materials. Providing minute-by-minute composition analysis of ores and concentrates will reduce process upsets, therefore increasing your mill throughput. The modular design allows for quick, low cost installation and maintenance.

ECA Elemental Cross-belt Analyser

The Thermo Scientific Elemental CrossBelt Analyzer (ECA) provides minute-by-minute quality analysis of your critical process streams to facilitate sorting, blending and out-of-seam dilution control. With the ECA, you can control coal quality in real time and improve the efficiency of your operation.

CQM Coal Quality Manager

The Thermo Scientific Coal Quality Manager (CQM) provides minute-by-minute quality analysis of your most critical coal streams. The CQM is the ultimate analyser with the best accuracy available, which allows you to minimize variations in coal quality, ensure contract compliance, and improve your efficiency.

Thermo Scientific Ramsey Model SWAX-7000

This primary sweep sampling type machine offers an economical and simple means to procure a representative sample directly from material on a conveyor belt. With over 1,000 units in service worldwide, it has been subjected to rigorous in-the-field testing and meets ASTM and ISO specifications. This sampler can be used as a stand-alone sampling device or as a primary in a multi-stage mechanical sampling system. Direct increments are obtained from in-motion, horizontal or inclined conveyors. It is ideally suited for the sampling of coal, limestone, ferrous and non-ferrous ores, sand, crushed rock and gravel. In high tonnage applications, the cutter is counterbalanced to prevent excessive stress on the conveyor.

Thermo Scientific Ramsey Tilt Switches and Control Units

The rugged, abrasion-resistant tilt switch is actuated when material rises to tilt the probe 15° or more from its vertical position. These switches are precisely positioned so that, regardless of the direction of tilt, its normally closed contacts will open. Various probe assemblies are available to suit applications utilizing an array of materials in a wide range of environmental conditions.

Thermo Scientific Ramsey CAP Series

These sensors are designed for point level monitoring of solids, liquids and slurries in bins, vessels and chutes. These controls detect the presence or absence of material by sensing a change in capacitance caused by the difference between the dielectric constant of the material and that of the air. Unlike other capacitance sensors, Thermo Scientific Ramsey CAP Series probes operate below the RF level and are not subject to FCC regulation or interference from other RF-emitting devices.

Thermo Scientific Ramsey TRX Series

These indicators are designed for point level monitoring of solids in bins, vessels and chutes. Their unique de-energising motor design reduces wear, lowers operating temperature and extends the motor’s life. Three SS drive shaft bearings and a sealed, lubricated, all-metal gear assembly augment its other features to make the Thermo Scientfic Ramsey TRX Series the most reliable rotary level controls on the market.

Thermo Scientific Ramsey Microwave Point Level Detector

This totally non-contacting detector provides high- and low-point level detection and can see through non-metallic wall build-up to detect the presence or absence of any material. It can be used in pressurized coal down comers; electrostatic precipitator hoppers; fly ash, clinker and coal transfer chutes; and other industrial applications. By sensing the conditions in chutes, it alerts the user of any problems or disruptions in the process. This detector is
a safe and environment-friendly replacement for nucleonic switches
and is not restricted by OSHA or FCC regulations.

Thermo Scientific Tank Weighing Assemblies

Compression tank weighing assemblies are provided as an option with the Thermo Scientific Ramsey C-Level strain sensors. They are meant for use on smaller bins and in applications requiring higher accuracy.

Thermo Scientific Ramsey C-Level

This indicator is ideally suited for inventory monitoring and process control during the load-out or filling of bins and vessels containing bulk solids or liquids. Because its unique, precision strain-gauge sensors are press-fit into the vessel’s support structure, the system can operate without concern for failure or maintenance issues caused by the monitored material or process environment. This distinctive design also compensates for temperature changes that can affect the accuracy of “bolt-on” strain sensors. Accurate to within ±2%, the Thermo Scientific Ramsey C-Level is unaffected
by corrosive or abrasive materials, uneven material discharge,
build-up on sidewalls, bridging, ratholing or dusting.

Thermo Scientific Ramsey BOB II

This inventory management system provides rugged and dependable continuous level monitoring of solids, liquids and slurries in vessels, silos and tanks. Its mechanical system of captive pulleys, a cable brush cleaning system, and line tracking allow it to work where other technologies and competitive products fail. The Thermo Scientific Ramsey Bob II is immune to dust, vapors, steam and temperature fluctuations. The unit can be applied in both hazardous and non-hazardous locations. Its microprocessor monitors the distance traveled by the weighted bob in both the descend and retract modes. These distances are measured and compared to ensure accuracy and trouble-free operation. It gives you a wide variety of control and communication options and can be configured to meet your specific application requirements.

Thermo Scientific Ramsey Motion Monitor System

This system offers a choice of versatile and reliable packages for monitoring under-speed, over-speed and zero-speed conditions on various types of machinery and systems by sensing the speed variations of rotating parts. Mechanically coupled (shaft-driven) or non-contacting proximity type sensors are available to suit particular application requirements and design preferences. The microprocessor-based Thermo Scientific Ramsey Model 60-200 programmable motion monitor control can be used with any Thermo Scientific sensor and, in some cases, with compatible pulse output sensors from other sources.

Thermo Scientific Ramsey Model 60-23P Under Speed Switch

This switch monitors the rotational velocity of a shaft or another type of rotating equipment. It may be used on conveyor belts, bucket elevators and other types of rotating equipment

Thermo Scientific Ramsey Safety Cable Pull Switch

A safety pull cable is attached to the actuating arm of the switch and terminated at fixed mounts at either end of a conveyor. Force applied to the pull cable at any position causes the actuating arm to move into a tripped-locked position and activates an alarm from one DPDT or two SPDT micro-switches, alerting equipment circuits of the stop condition. This will stay locked until manually reset by the reset lever.

Thermo Scientific Ramsey Belt Misalignment Switch

This switch is mounted on the top or bottom of conveyor stringers with its actuating arm adjusted to the outside edges of the belt. If the belt skews or misaligns, contacting the actuating arm and displacing it from its vertical position, a connection is made with one or more of the micro-switches. A 10° displacement of the actuating arm activates an alarm signal to warn of a potential shutdown, allowing the operator to make adjustments and realign the belt. A 20° displacement will activate a signal to shut down the process in order to prevent or minimize damage to the belt.

Granuflow Flow/No-Flow Detectors

These sensors are low-cost, non-invasive, microwave-based instruments that detect and monitor flow/no-flow conditions of bulk solids in pipelines, ducts and air-slides, and at transfer points of chutes, conveyor belts and bucket elevators. This real-time flow information allows you to monitor processes closely and leads to increased reliability, higher quality end product, reduced downtime and fewer hazards to jeopardize operators and equipment.

Used for automation purposes, the Thermo Scientific Ramsey Granuflow DTR 131, DTR 231 and GTR 130 optimize the efficient use of machinery and energy by switching process equipment on or off as required. They have no moving mechanical parts, which eliminates wear and makes the instrument maintenance and trouble-free.

Thermo Scientific Ramsey Granucor Solids Flow Measurement System

The in-line measurement of bulk solids flow is important for product quality, process efficiency and system safety. This system provides continuous, real-time flow measurement of free-falling materials or dense phase, pneumatically conveyed bulk solids.

 

The system consists of a DK13 velocity sensor which uses cross-correlation to measure material travel time between two points, a DC13 concentration sensor to measure the change in capacitance with material present versus an empty pipe, and a Ramsey Micro-Tech 9109 Granucor electronics which calculates the mass flow rate.

 

The Ramsey Granucor’s non-intrusive design and software can be used to monitor and control the flow in pipes or the flow distribution through pipe networks.

Impact Weighers

These unique devices are designed to continuously measure the mass flow rate and total mass of free-flowing particulate materials in mechanical conveying systems without interrupting the flow of material.

Thermo Scientific impact weighers provide a low-cost, yet highly accurate, method of measuring the mass flow of dry solids and powders for inventory process control and can help you save thousands of dollars by reducing waste and improving product quality. They are ideal for applications in vertical flow streams where weighbelt feeders or belt conveyor scales will not fit or cannot be applied. These systems are easy to install and maintain. Our impact weighers can operate with a variety of pre-feed devices, including screw or vibratory feeders, belt conveyors, drag conveyors, air slides or rotary valves. Product weighing and totalisation functions are performed with the Thermo Scientific Ramsey Micro-Tech 9106 impact flow meter electronics.

Thermo Scientific Ramsey Micro-Tech 9105

These specialised instruments are multi-functional digital control devices that incorporate all weighing, logic and control functions into a single dedicated package. An ideal attachment for weighbelt feeders which optimise blending and ratio controls of minerals being processed by the feeder.

Thermo Scientific Ramsey Model 90-150

This weighbelt feeder provides a consistent flow of material, offers increased sensitivity for more accurate weighing of the lightest materials, and permits quick and easy cleaning and maintenance. Its stainless-steel construction provides improved corrosion resistance and washdown capabilities. This model accommodates flow rates as low as 54 kg (120 lb) per hour up to 22,680 kg per hour, and belt loadings of 3 kg/m to 30 kg/m.

Thermo Scientific Ramsey Model 90.125

The Thermo Scientific Ramsey Model 90.125 weighbelt feeder’s unique cantilevered and formed channel frame design provides a strong and sturdy weigh structure. It’s design also allows for quick and easy maintenance. It accommodates flow rates of approximately 0.5 metric tons per hour up to 91 metric tons per hour, and belt loadings of 15 kg/m to 170 kg/m.

Thermo Scientific Ramsey Model 90.100

This weighbelt feeder’s heavy-duty construction provides larger pulleys and a very sturdy, rugged frame for increased accuracy in high-rate, heavy-duty applications. It accommodates flow rates up to 816 metric tons per hour, and belt loadings up to 447 kg/m. Its endless belt design allows the belt to be changed with minimum downtime

Thermo Scientific Digital Belt Speed Sensor

The Thermo Scientific Digital Belt Speed Sensor is the most reliable and accurate speed-sensing device that’s ever been developed for belt scale service. Direct-coupling the sensor to the conveyor tail pulley, snubbing roll or a large diameter return roller, ensures accurate belt-travel readout. Its rugged, cast-aluminium housing makes it suitable for outdoor installations. It comes equipped with an AC pulse generator, so there are no brushes to adjust or replace

Thermo Scientific Ramsey Micro-Tech 9000

This series of electronic integrators signifies a new approach to scale instrumentation, giving the user more flexibility and increased upgrade capabilities. These instruments, available in field or panel mount versions, are suitable for applications utilising:

  • Belt conveyor scales.
  • Weigh belt feeders.
  • Loss-in-weight feeders.
  • Impact flow meters.
  • Other dynamic weighing systems.

Because all of the Thermo Scientific Ramsey Micro-Tech conveyor belt scale models use a common platform, the user only needs to become familiar with one basic interface. These integrators also have extraordinary communication capabilities, that allow them to connect to intelligent peripheral equipment, including computers, programmable logic controllers, printers and network systems.

Thermo Scientific Ramsey Series 14

Specifically designed for high accuracy or basis-of-payment application, this conveyor belt scale system requires certification by government and regulatory agencies. Due to this, it’s extremely accurate, to within 0.125% and is the most widely certified belt scales in the world. It has received a Certificate of Conformance in the United States, as issued under the National Type Evaluation Program from the National Conference on Weights and Measures. Outside of the U.S, it is certified by OIML and EEC Class I standards. This system represents the world standard of accuracy and performance for loadout, inventory monitoring and fee-holder type applications.

Thermo Scientific Ramsey Series 17

The Thermo Scientific Ramsey Series 17 belt scale system is specifically designed for plant and process operations, that run at high rates of speed or require high accuracy. Its unitised multi-idler weighbridge promotes more scale-borne time, which minimises alignment errors, allowing this model to be offered as a highly accurate 0.25% scale system. The team at Minprovise can supply you with this system in a two or four-idler version.

Thermo Scientific Ramsey Series 20

Thermo Scientific have designed this conveyor belt weighing system to monitor feed to crushers, mills, screens and other processes with an accuracy of 0.5%, even in the most demanding industrial applications. It is designed for general in-plant belt conveyor weighing, and lets you monitor production output and inventory or regulate product loadout.

Thermo Scientific Ramsey IDEA

The Ramsey IDEA belt scale system provides basic rate information and totalisation functions involving non-critical or lower value materials with an accuracy of 1%. It is available in either single or dual module configurations, and its highly compact design makes it ideal for operations where economy and ease of installation are important considerations.

Gyratory Crusher (GY Model)

Features of the GY Gyratory Crusher:

The excellent design of the Gyratory Crusher is only one of the reasons the team at Minprovise recommend this model when choosing crusher equipment. The GY’s design is a combination of some of the world’s most modern engineering techniques and applications. Earthtechnica’s newest 60-109 GY can be divided into several smaller parts, which makes it easy and cost-effective to transport and install. Each of these individual parts for the GY crusher, are built for endurance and long-life wear.

Created by one of the Industry Leaders in Crushing Equipment

With more than 80 years of experience within the crushing equipment industry, Earthtechnica have supplied more than 120 gyrator crushers to mines and quarries worldwide. Through their strategic partnership with our team at Minprovise, we’re able bring this experience and industry leading equipment to the Australian market.

 

 

Gyratory Crusher (KG Model)

Features of the Gyratory KG Crushing Equipment:

The KG crusher features a simple discharge set, making it an efficient solution for your business. The discharge setting on this model is simple and can easily be adjusted by the amount of oil in the hydraulic cylinder installed at the bottom of the main shaft.

Main Shaft Collapse Prevention

If hard ore enters the crushing chamber, the main shaft may develop a jumping action. To prevent the main shaft from falling down, the hydraulic support for the main shaft is maintained by raising a piston within the balance cylinder, which contains air and oil.

Re-start Capability while Loaded

If the crusher stops unexpectedly during its procedure and the raw material inside needs to be removed from the crushing chamber, the KG’s hydraulic system will accommodate this. It does this by lowering its crushing head in order to discharge the wedged ore, allowing for immediate restart.

Heavy Duty Spider Bearing

The KG’s large spherical bearing is equipped with a spider bearing to reinforce it for continuous heavy strain and long life.

 

HPC Cone Crusher

High Pressure and Performance Crushing Equipment

The HPC Cone Crusher has been designed and developed to achieve a high crushing ratio and high through-put capacity, with its newly designed crushing chamber. This chamber achieves this by increasing the density of feed material from inlet to outlet as the materials are crushed under high pressure.

The robust design of the crusher body is reinforced to withstand high pressure crushing, and to ensure that the crusher equipment can be operated under heavy operating conditions for long periods of time.

If you’re looking for a cone crusher for sale, the team at Minprovise can help. Contact our expert team to find out more about our wide range of crushers including, Kawasaki and Kobe crushers

Features of the HPC Cone Crusher

Crushing Equipment with High Performance

HPC curved crushing chamber provides a high level of performance. The bisector line is vertical at the inlet of the crushing chamber, with a gradual slant from inlet to outlet. This design ensures the gravitational push of feed materials downwards into the crushing chamber at an economical and efficient rate, increasing not only your through-put capacity, but also your high set-under ratio. The performance of the cone crusher is one of main reasons we offer this equipment for sale at Minprovise.

Endurance of Performance

In the case of conventional cone crushers, usually the inlet width of the crushing chamber decreases through the constant wear of its crushing members. In the case of Earthtechnica’s HPC, the upper region of its crushing parts is especially reinforced with a unique groove, this ensures the even wear of its parts from inlet to outlet.

Wide Inlet of Crushing Chamber

The configuration of the upper part of the HPC concave is an inverse cone which provides a wide inlet into the crushing chamber. The HPC can receive very flat and long materials without bridging, allowing the crusher to be used as a substitute for the secondary gyratory crushers.

Robust Body Design

The HPC is specifically designed for the body to withstand continuous heavy loads of feed materials that are also robust and strong in nature – especially iron ore.

 

ZI Cone Crusher

Earthtechnica, a subsidiary company to leading international manufactures Kobe and Kawasaki, have created the ZI-series Cone Crushers. This crusher has been developed to incorporate all the successful features of their previous CYBAS Cone, to achieve increased performance within the same size body. The crushing members of the ZI CONE are a combination of a mantle, concave with grooves, and special mild inserts (MSI). This arrangement leads to compound crushing, consisting of not only compression, but also crushing through bending and shearing actions. The synergy of this compound and high-density inter-particle crushing within the main chamber, results in superior results with large feed capacities while using less energy. Find out more about the ZI Cone Crusher we have for sale by reading the features below.

Features of the ZI Cone Crushing Equipment :

High Crushing Capacity

The high capacity of the ZI Cone’s crushing chamber, coupled with its combined crushing effect, results in a remarkable improvement in crushing capacity.

High Set Under Ratio and Professional Shape

The bisector line of the ZI crushing chamber is almost vertical at the inlet. Its angle of inclination changes gradually until it reaches a specific angle at the outlet. Accordingly, the density of the feed material is increased as it proceeds from the inlet towards the outlet. This causes inter-particle crushing due to the high density in the crushing chamber. As a result, a product with roundish cubic shape can be produced, with high set under ratio.

Lower Energy Cost

The ZI Cone Crusher performs combined crushing through bending, shearing and compressing actions of its grooved crushing plates, as compared to conventional crushers that use compression only. This leads to a more efficient power output, which in turn leads to considerable energy savings.

Easy Adjustment of Discharge Setting

The ZI’s hydraulic system provides easy discharge settings, even during operation, through it’s easy-use control panel. These adjustments can also be remotely controlled.

Easy and Safe Maintenance

The inside of the ZI crusher can be easily checked through its large inspection windows located on its bottom frame. A Special torch ring enables the easy and quick replacement of the liners in a short time while the head nut for its mantle can be used repeatedly.

Astro Jaw-E Crusher

Features of the Astro Jaw-E Crushing Equipment

Large Crushing Capacity with New “V” Chamber Design

The newly designed “V-shape” crushing chamber ensures the Jaw Crushers ability to withstand large capacities of feed material, while Its reversible, corrugated jaw plates create a non-choke configuration. This crusher is manufactured by Earthtechnica, which includes Kobe and Kawasaki.

Strong Body Design

This crusher is fully fabricated with a stress-reinforced, one-piece frame and swing-jaw, both of which are built to last and go the hard yards.

Easy Maintenance

The Astro comes with a set-adjusting device which cuts lead times in half. Its jaw plates retain their position through bolted wedges while spherical roller bearings with labyrinth seals prevent the ingress of dust.

Super Sander (KMC)

Sand Making Impact Crusher

The Super Sander is a specialist machine, designed for dry crushing and grinding for sand production. Flaky materials are crushed and ground down to a superior product shape.

Feed material is constantly fed into the crushing and grinding chamber, which is formed through the unique combination of grinding path and inter-particle crushing components. This process achieves a product size and quality comparable to natural sand.

 

 

Super Impeller (KIS)

Features of the Super Impeller:

Excellent Product Shape

Excellent grain forms are achieved by the adoption of this crushers special grinding path system and its improvements to impact and grinding operations. Additionally, the machine is capable of producing reduced material sizes as a result of its high reduction ratio.

Easy Maintenance

The Super Impeller’s boltless system makes the fixing or replacement of its striking blades and grinding path liners simple and efficient, while also ensuring that its daily maintenance and control is front of mind with ease.

Easy Adjustment of the Discharge Opening

The variability of adjustment to the discharge opening and grinding path are made practical and simple through this crushers unique hydraulic cylinder.

Impeller Breaker (KAP/SAP)

Features of the Impeller Breaker:

Greater Crushing Ratio

A high crushing ratio of 10-3 (compared to the 5-3 of conventional gyrators, cone or roll crushers) effectively eliminates several crushing processes from more basic crushing systems.

Cubical Products

Compared to compression crushers, the Impeller Breaker produces much higher quality cubical products – ensuring greater savings for mortar than the aggregate of other machines crushing concrete of equal strength.

Selective Crushing Capacity and Uniform Product Size

Because of the lack of binding force, feed materials can be separated into their various elemental components. The size or shape of these material feeds also has no influence whatsoever on the final product size.

Low Power Consumption and Minimum Installation Costs

As an impact crusher, the greatest portion of power transmitted to the rotor is used purely for crushing. As this machine is compact, yet powerful, the impeller breaker requires little space. Vibration-free operation means simpler, less costly foundations.

Safety with Foreign Materials and Easy Maintenance

If foreign materials enter the crusher, the impact plate ensures this unwanted material is quickly discharged. The Impeller Breaker is so well designed and manufactured that no operator training is required to operate it. The crusher has simple usage instructions.

Luwirep 70

Luwirep 70, For Fast Conveyor Belt Repair & Wear Protection

The Luwirep 70 is designed for the fast repair of rubber conveyor belts and wear protection. This 2-component repair material was developed by LUTZE, especially for damaged rubber conveyor belts.

The adhesion and abrasion on this system were optimised to the rubber’s characteristics. Conveniently, the Luwirep 70 can repair damages in as little as 40 minutes, and the conveyor is operational immediately once completed.

Applications for Conveyor Belt & Wear Protection Repair

The Luwirep 70 is compatible with all common scraper and belt cleaning systems and is suitable for a variety of applications where repairs are required. Find out about the appropriate applications for this system below.

  • Repairing of cover rubber damages of fabric and steel cord conveyor belts.
  • Compatible with all common scraper and belt cleaning systems.
  • Covering mechanical fasteners.
  • Restoring extremely stressed areas.
  • Sealing plate seams of installed linings.

Advantages

The Luwirep 70 allows you to repair your conveyor belt efficiently, minimising the downtime of your conveyor, helping you to get back to work sooner. Find out more about the advantages of the system below.

  • Only small tools required.
  • Fast and clean processing.
  • Fastest curing time.
  • Minimum downtime of your conveyor.
  • Simple handling, even for inexperienced users.
  • Applicable in hard-to-reach locations.
  • Perfectly adjusted to rubber characteristics.
  • Cartridges can be closed after being opened.
  • Good adhesion on nearly every material.

Please ask for special primers for your application.

Luwirep 85

The Luwirep 85 For PU Wear Protection Repairs

The Luwirep 85 is ideal for filling seams, as well as transitions of bolted or bonded Luwitan plates, and other lining materials. Due to the superb abrasion characteristics, it can also be used for strengthening heavily stressed areas.

The material is processible for approximately 10 minutes and can be mechanically finished after hardening.

Applications of The Luwirep 85 Repair System

This system can be used for a variety of applications where repairs on PU wear protection is required. A full list of the applications it can be used for can be found below.

  • Sealing plate seams of installed linings.
  • Equalising of transitions.
  • Strengthening of heavily stressed areas.
  • Repairing damages.

Advantages

  • Only small tools required
  • Excellent wear resistance
  • Fast reaction time
  • Also applicable in vertical and over-head situations
  • Good adhesion on nearly every material
  • (please ask for special primers for your application)

Contact Us

To learn more about the Luwirep 70 and 85 repair systems fill out the contact form below. Alternatively, contact us on (08) 9359 6800 today.

Compound Crusher (AP-C)

Primary Impact Crusher – Double Rotor

The Compound Crusher is a double-rotary, primary impact crusher, which functions as both a primary and secondary crusher. Find out more about the Compound Impact Crusher we have for sale below.

Features of the Compound Crusher Equipment

High Reduction Ratio and Capacity

With its high capacity crushing chamber, fixed striking blade and single grinding path arranged effectively around its rotor, this compound crusher is optimised to achieve high reduction ratios while taking on large capacities of feed material. These materials can then be fed to the ball mill without the need for any secondary crushing.

Robust and Reliable Design

It’s simple robust design and rotor creating strong inertia forces allows this crusher to withstand heavy-duty use with reliable durability.

Easy Maintenance and Operation

The compound crusher is equipped with a fully hydraulic system which allows for easy and adjustable product sizing and maintenance. Large inspection hatches are engineered to all faces of the machine.

Luwispray Spray Coating

Our highly elastic coating materials for wear and surface protection ensure that system components, vehicles, mixers, mills, cyclones, etc. last that much longer. PU spray coatings are particularly suitable for wear and tear through sliding abrasion, often in conjunction with a chemical exposure. The required layer thickness is chosen depending on the application and is at least 2 mm.

Uses

  • Lining of coal, ore and sand bunkers and dust collectors
  • Corrosion protection for system parts
  • Silo and tank linings
  • Screw conveyors and screens
  • Conveying equipment
  • Chutes and slides
  • Pipe linings
  • Vibratory grinding container
  • Mixer and shaker
  • Pump parts and cyclones

LUWISPRAY spray coatings are distinguished by the following: 

  • Highly resistant to wear
  • Age-resistant
  • Impact-resistant
  • Chemical-resistant
  • Crack-bridging
  • Permanently elastic
  • Hydrolysis-resistant
  • Seamless

Super Breaker (KSB)

Primary Impact Crusher

The Super Breaker is an impact crusher with a single rotor, specially designed for primary crusher use in cement plants. Earthtechnica’s experienced technology makes it possible to feed the materials directly to the roller mill without any secondary crushing required. The Super Breaker will help your company increase its productivity and profit.

Features of the Super Breaker

High Reduction Ratio and Capacity

With a high capacity crushing chamber, fixed striking blade, two impact plates and one grinding path, all arranged effectively around the rotor, the Super Breaker is optimised to achieve high reduction ratios and capacities. The materials can be fed to the roller mill without the need for any secondary crushing.

Tough and Reliable

It’s simple and robust design, combined with its large force of inertia allow for this crusher to withstand ongoing heavy-duty use with guaranteed reliability.

Cost Efficient

Installing just one Super Breaker can make your crushing system simpler, while reducing the total amount of power required throughout your processes, minimising your operation costs. It’s striking blade and other important wear parts are fabricated with high quality, wear resistant steel castings.