FastJac

Technofast’s FastaJac saves on Production, Labor and Maintenance Costs for Manufacturers and End Users of Plate Heat Exchangers.

The use of a lightweight hollow cylinder jack, in conjunction with the patented ‘Tri Nut’, allows the compression of plates to be  carried out evenly, squarely and efficiently. The hydraulic cylinders simultaneously compress the plates. The Tri-Nut is designed to fit over the major diameter of the thread until it engages into it’s spherical seat. Then the nut closes onto the thread and the nut is screwed home as normal. This facilitates speedy fitting and removal of the tools  removing the need for ‘running down’ the Tensioner retaining nut over the full length of the thread.

Tool Features:

  • The Patented ‘Tri Nut’ allows the Tensioner to be removed and installed on the exchanger quickly
  • The hydraulic cylinders simultaneously compress the plates so the compression of plates are carried out evenly, squarely and efficiently
  •  Unique cam lock design
  • Tri Nut locks into tool, even in upside down position
  • Quick connect fittings
  • No Pinch Points

Y2 & X2 – 2 Stage Tensioning

Technofast’s X2 & Y2 2-Stage EziJacs encompass a large range of slim bodied tensioners to complete maintenance on any application with restricted space.

The 2-Stage series of hydraulic Tensioners are a lightweight, user friendly range of Tensioners, which are quickly and easily fitted in restricted spaces. These Tensioners are powerful & provide accurate and versatile tensioning of bolts and studs, whilst being fast, simple and safe to use.

Tool Features:

  • Stroke Indicator
  • Long Stroke
  • Spring return piston
  • Over stroke prevention
  • Slim fit design
  • Leak-free, low-friction seals
  • Nitrated components
  • Optional side gear box
  • Quality assured

Technofast’s X2 and Y2 Multistage Bolt Tensioners may be fitted with an optional Gear Drive to rotate the retaining nut without the use of a Pin Spanner. The drive is operated using a standard 1/2″ socket wrench. The feature optimises the speed of operation and allows the tools to be used in restricted spaces where a Pin Spanner drive could not be employed. An Integral idler gear is used to ensure that the drive tool and nut rotations are in the same direction.

B3M EziJac Bolt Tensioner

The EziJac uses hydraulic pressure to tension the bolt to the exact load required. Once the bolt has been tensioned, the nut is wound down the thread to retain the load. The EziJac is then de-pressurised, released and ready to use again.

Tool Features:

  • Stroke indicator
  • Long Stroke
  • Interchangeable Adaptor Kits
  • Leak-free, low-friction seals
  • Nitrated components to increase the tool life
  • Optional second port
  • Quality assured

Benefits of a B3 Series EziJac:

  • Reduce assembly time for critical jointing applications
  • Multi-point tensioning for even gasket compression
  • Reduced labour input
  • Requires little physical effort
  • Improves safety on the job by eliminating hammer tightening
  • No pinch points – Unlike power wrenches
  • Remote pumping – No operators in close work area
  • User friendly; fast to fit and remove

 The B3M EziJac is Ideal where:

  • Accurate and repeatable loading is required
  • Irrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustments or removal of nuts
  • Confined and difficult nut locations
  • Simultaneous tensioning of bolts is required (eg: Flanges)

B3S EziJac Bolt Tensioner

Safe, Easy-to-operate and built with Spring Return – This Product ensures only the most accurate of Bolt Tensioning.

The B3S EziJac uses hydraulic pressure to tension the bolt to the exact load required. Once the bolt has been tensioned, the nut is wound down the thread to retain the load. The EziJac is then depressurised, released and ready to use again.

Tool Features:

  • Stroke indicator
  • Long Stroke
  • Spring return piston
  • Interchangeable Adaptor Kits
  • Leak-free, low-friction seals
  • Nitrated components to increase the tool life
  • Optional second port
  • Quality assured

Benefits of a B3 Series EziJac:

  • Reduce assembly time for critical jointing applications
  • Multi-point tensioning for even gasket compression
  • Reduced labour input
  • Requires little physical effort
  • Improves safety on the job by eliminating hammer tightening
  • No pinch points – Unlike power wrenches
  • Remote pumping – No operators in close work area
  • User friendly; fast to fit and remove.
  • Spring Return models for automatic retraction

 The B3S EziJac is Ideal where:

  • Accurate and repeatable loading is required
  • Irrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustments or removal of nuts
  • Confined and difficult nut locations
  • Simultaneous tensioning of bolts is required (eg: Flanges)

B2 EziJac Bolt Tensioner

The B2 EziJac Stud Tensioner utilizes the power of hydraulic pressure to produce the force necessary to tension bolts and studs accurately & safely.  The B2 EziJac Dedicated Stud Tensioners provide the answer to many of the fitting problems associated with using larger tensioning equipment. They are also ideal for single task applications which do not require interchangeability of thread sizes. Any number of B2 EziJacs can be interlinked to provide simultaneous tension over multiple studs or bolts as required

Tool Features:

  • Stroke Indicator
  • Long Stroke
  • Leak-free, Low-friction seals
  • Nitrated components to increase the tool life
  • Manual return
  • Optional second port
  • Quality assured

Benefits of B2 EziJac

  • Reduces maintenance down time
  • Improves safety on the job by eliminating hammer tightening
  • Reliable and precise tensioning
  • Is user friendly – fast to fit and remove
  • Requires little physical effort
  • Ideal for confined spaces or difficult locations

The B2 EziJac is Ideal where:

  • Accurate and repeatable loading is required
  • Irrational or torsional stresses are a problem
  • Regular maintenance requires repeated adjustments or removal of nuts
  • Confined and difficult nut locations
  • Simultaneous tensioning of bolts is required (eg: Flanges)